Specifications

Tsunami HP and BB Specifications1

Output Characteristics Tsunami HP fs
15 W Pump		 Tsunami HP ps
15 W Pump		 Tsunami HP fs
10 W Pump		 Tsunami BB fs
10 W Pump		 Tsunami BB ps
10 W Pump
Tuning Range 700-1080 nm2 700-1000 nm 700-1050 nm 700-1000 nm 700-1000 nm
Average Power3 >2.7 W at 800 nm >2.9 W at 800 nm >1.4 W at 800 nm >1.4 W at 800 nm >1.5 W at 800 nm
Pulse Width3, 4 <100 fs <2-100 ps <100 fs <100 fs <2-100 ps
Peak Power2 >337 kW at 800 nm - >170 kW at 800 nm >170 kW at 800 nm -
Pulse Energy ~34 nJ ~36 nJ ~15 nJ ~14 nJ ~19 nJ
Tsunami HP Models 3960C-15HP5
3941C-15HP		 3950C-15HP
3960C-15HP5		 3960-10HP5
3941-10HP		 3960-X1BB
3941-X1BB		 3950C-X1BB
3950-X1BB

Tsunami BB and Short Pulse Specifications1

Output Characteristics Tsunami BB
fs 5 W Pump		 Tsunami BB
ps 5 W Pump		 Sub 30 fs Tsunami
5 W Pump		 Ultra Short Pulse
Tsunami 10 W Pump		 Ultra Short Pulse
Tsunami 5 W Pump
Tuning Range 700-980 nm 700-980 nm 780-820 nm 780-850 nm 780-850 nm
Average Power3 >0.7 W at 800 nm >0.7 W at 800 nm 400 mW at 800 nm 900 mW at 800 nm 500 mW at 800 nm
Pulse Width3, 4 <100 fs <2-100 ps <30 fs <50 fs <50 fs
Peak Power2 >85 kW at 800 nm - >160 kW at 800 nm >225 kW at 800 nm >125 kW at 800 nm
Pulse Energy ~8 nJ ~8 nJ ~5 nJ ~11 nJ ~6 nJ
Tsunami Broaband Models 3960-M1BB5
3941-M1BB
3960C-M1BB5
3941C-M1BB		 3950-M1BB
3960-M1BB5
3960C-M1BB5
3950C-M1BB		 3941-30-M1S 3941-X1S-USP 3941-M1S-USP

General Tsunami Specifications1

Repetition Rate (nominal)1 80 MHz
Noise2 <0.2
Stability3 <5%
Spatial Mode TEM00
Beam Diameter (1/e²) <2 mm
Beam Divergence, full angle <1 mrad
Polarization >500:1 vertical

Footnotes:

  1. Laser operation is specified at a nominal repetition rate of 80 MHz.
  2. Specification represents rma noise measured in a 10 Hz to 2 MHz bandwidth.
  3. Percent power drift in any two-hour period with <±1°C temperature change after a one-hour warm up.
  4. Tsunami is a Class IV - High-Power Laser, whose beam is, by definition, a safety and fire hazard. Take precautions to prevent exposure to direct and reflected beams. Diffuse as well as specular reflections can cause severe skin or eye damage.

Features

Superior Design

The superior design of the Tsunami prism dispersion compensation enables short, transform-limited pulses. The unique λ-track prism movement enables excellent beam pointing as the laser is tuned. The use of slits for wavelength selection in femtosecond operation, combined with advanced dispersion compensation allows wide pulse duration adjustment over the femtosecond range from <60 femtoseconds to >900 femtoseconds. The Tsunami laser can then be easily converted to picosecond mode to cover from less than 2 picoseconds to greater than 100 picoseconds with use of the appropriate GTI.

Flexibility

The Tsunami series contains the flexibility to have both femtosecond and picosecond pulses on the same platform with the 3960 series, a femtosecond only version with the 3941, and picosecond only with the 3950 series. The Tsunami series can be pumped with a Millennia eV in powers of 5, 10 or 15 watts so that the laser output can match the required amount of energy for each experiment.

Lok-to-Clock

The Tsunami laser pulses can be synchronized to other lasers or laboratory equipment with the optional Lok-to-Clock® accessory. Lok-to-Clock actively stabilizes the cavity length to an internal reference clock or can be used to slave the laser to a reference pulse train from another source.

Short Pulse Width

The short pulse Tsunami systems use high-performance optics to allow >65 nm of bandwidth to produce <30 fs pulses. The Tsunami 3941-30-X1S typically achieves >800 mW of average power with >350 kW of peak power.

Expansion

The Tsunami oscillator can be combined with Spectra-Physics harmonic generators and optical parametric oscillators, such as the Inspire™ OPO. Optional pulse picking can be added to adjust the repetition rate from single shot to 8 MHz, while still providing enough pulse energy for demanding fluorescence lifetime applications.

호환 가능한 파워 센서

Tsunami 레이저의 출력 확인과 분석은, Ophir 10A (7Z02637) 또는 3A  (7Z02621) 열 전력 센서와 Centauri 레이저 파워 미터를 추천합니다. 이 레이저 측정 장비에 대한 추가 정보는 ophiropt.com 에서 웹사이틍서 찾아 볼 수 있습니다. 다른 Ophir 센서와 미터기도 용도에 따라 Tsunami 에 적합할 수 있습니다. 또한 Ophir 는 레이저 시스템 개발자들과의 협력을 통해 임베디드 빔 진단법을 구축하여, OEM 솔루션으로서 시스템 성능을 모니터합니다.

Resources

Data Sheets

Drawings & CAD

Application Notes

Literature

사전 설치 가이드